Infos
- Selon DIN 3122 / ISO 3315
- Carré d'entraînement avec bille de maintien selon DIN 3120 / ISO 1174
- Réversible
- Très robuste grâce à la technique de double broches
- Tête extra-fine
- Cliquet précis 96 dents
- Poignée ergonomique bi-composant avec partie molle
- Finition satinée
- Chrome Vanadium
Caractéristiques techniques
| Désignation | Valeur |
|---|---|
| % SALE % | Oui |
| Angle d''inclinaison vers l''arrière | 3,75 |
| Attribut de fonction 2 | Réversible |
| Carré d'entraînement en pouce | 3/8" |
| Couple de serrage jusqu’à [Nm] | 365 Nm |
| Couple de serrage à partir de [Nm] | 0 Nm |
| Dent | 96 -teeth |
| Dimension D | 30 mm |
| Hauteur de tête (A) | 18 mm |
| Lien vidéo Utilisation | https://youtu.be/TZyUW10CWkc |
| Longueur totale L en mm | 198 mm |
| Matériel 1 | Acier Chrome Vanadium extra-fin, satiné mat, chromé |
| Numéro de fabricant | 935.3890 |
| Poids en g | 277 g |
| Poignée | Poignée bi-composant |
| Standard | DIN 3120, ISO 1174, DIN 3122, ISO 3315 |




.AW1_SALL_AING_V1.jpg?_a=DATAg1eAZAA0)
.AW2_SALL_AING_V1.jpg?_a=DATAg1eAZAA0)
.AW3_SALL_AING_V1.jpg?_a=DATAg1eAZAA0)
.AW4_SALL_AING_V1.jpg?_a=DATAg1eAZAA0)
.AW5_SALL_AING_V1.jpg?_a=DATAg1eAZAA0)
.AW6_SALL_AING_V1.jpg?_a=DATAg1eAZAA0)
.AW7_SALL_AING_V1.jpg?_a=DATAg1eAZAA0)
.AW8_SALL_AING_V1.jpg?_a=DATAg1eAZAA0)
.AW9_SALL_AING_V1.jpg?_a=DATAg1eAZAA0)
.AW10_SALL_AING_V1.jpg?_a=DATAg1eAZAA0)



